|
 |
PristineBlue®, the cornerstone of the
PristineBlue® system, is an environmentally friendly algicide and bactericide. PristineBlue®
is EPA registered in every state and is Certified to
NSF/ANSI
Standard 60 for drinking water.
Application rate: For pools add 2 ounces per 1,000
gallons. For spas add 5 milliliters per 100 gallons.
Test PristineBlue® level every 2 weeks with the PristineBlue® Mini Test Kit and “top off” according
to the chart in the Pool & Spa Care Guide. |
|
|
 |
PristineCheck® is a water prep that gets your
pool or spa water ready for the introduction of
PristineBlue®. PristineCheck®
takes excess calcium from the water and deposits it
into the filter. It’s essential to backwash or clean
the filter
after the use of PristineCheck®. If your source
water is high in calcium, we recommend an
application of PristineCheck® whenever you add
makeup water to the pool or spa.
Application rate: For pools add 2 ounces per 1,000
gallons. For spas add 10 milliliters per 100
gallons. Circulate for 24 hours, then backwash
filter or remove and clean cartridge. |
|
|
 |
PristineClean® ensures
sparkling clean surfaces in your pool by inhibiting
scale formation and stains caused by metals in the
water. It prevents the metal and mineral particles
that enter your pool through hoses, jewelry and
metal equipment from bonding to pool walls and other
surfaces. PristineClean® is added every two weeks
along with PristineBlue®. PristineClean® may also
be used to remove existing metal stains in pools.
Application rate: For pools add 2 ounces per 10,000
gallons every 2 weeks. For spas add 1 milliliter
per 100 gallons every 2 weeks. |
|
 |
PristineClear®
clears cloudy water in pools and
spas bringing suspended particles together enabling
the filtration system to better remove particles.
PristineClear® is suitable for all pH levels.
Application rate: For pools add 2 ounces per 10,000
gallons every 2 weeks. For spas add 1 milliliter per
100 gallons every 2 weeks. Circulate for 24 hours,
then backwash filter or remove and clean cartridge.
|
|
 |
PristinePower® is a
non-chlorine oxidizer or shock. It dissolves quickly
and removes odors and organic materials,
contaminants and body oils that otherwise build up
and cause cloudy or dull water. Weekly or biweekly
shocking is recommended for pools. In spas we
recommend a dose of PristinePower® after each use of
the spa, not to exceed once per day. Unlike chlorine
shocks, it is safe for swimmers to enter the water
within 15 minutes!
Application rate: For pools add 1 pound per 10,000
gallons, weekly or every 2 weeks. For spas add 5
milliliters (or 1 teaspoon) per 100 gallons after
each use of the spa, not to exceed once per day. |
|
 |
PristineExtra® is a 99% sodium di-chlor shock
that is used in the start up for PristineBlue®. It
dissipates rapidly, therefore rendering the water
back to a non-chlorine status.
Application rate: For pools add 1 pound per 10,000
gallons, at start up. For spas add 5 milliliters (or
1 teaspoon) per 100 gallons, at start up. |
|
 |
PristineMist®
prevents and eliminates odor and discoloration to
the underside of the spa cover.
Application rate: Use PristineMist® and spray spa
cover every 4 to 6 weeks.
To purchase this product, contact:
1-800-257-9283 Ext. 21 |
|
 |
PristineFill® is like filling
your spa with bottled water. This tap water
pre-filter removes 99% of chemical contaminants,
chlorine, organics and phosphates from the water.
PristineFill® can filter up to 1,500 gallons of
water providing 3 to 5 spa fills and top offs.
Application rate: Connect filter to garden hose and
fill spa.To purchase this
product, contact:
1-800-257-9283 Ext. 21 |
|
 |
The Pool Start Up Kit contains
everything you need to get your chlorine pool
started on PristineBlue®. It is for pools up to
16,000 gallons.
Contains:
- one 32-ounce container of PristineCheck®
- one 32-ounce container of PristineBlue®
- two 1-pound
bags of PristineExtra®
- measuring cup
- PristineBlue®
Pool & Spa Care Guide
|
|
 |
The PristineBlue® Spa Kit
contains all of the components of the PristineBlue®
system.
Spa Kit is a six-pack containing PristineBlue®, PristineCheck®, PristineClean®, PristineClear®, PristinePower® and PristineExtra®. |
|
 |
The PristineBlue® Mini Test Kit
is easy to use and measures the PristineBlue® level
in your water so you can calculate your “top off”
dose. Accurate liquid reagents minimize the
guesswork. |
|
 |
PristineStripstm allow you to
monitor your pool or spa’s total alkalinity and pH.
Swirl the strip 3 times in the water and wait 10
seconds for the results to develop. |
